Caesar

For this problem, you’ll implement a program that encrypts messages using Caesar’s cipher, per the below.

$ ./caesar 13
plaintext:  HELLO
ciphertext: URYYB

Getting Started

Open VS Code.

Start by clicking inside your terminal window, then execute cd by itself. You should find that its “prompt” resembles the below.

$

Click inside of that terminal window and then execute

wget https://cdn.cs50.net/2021/fall/psets/2/caesar.zip

followed by Enter in order to download a ZIP called caesar.zip in your codespace. Take care not to overlook the space between wget and the following URL, or any other character for that matter!

Now execute

unzip caesar.zip

to create a folder called caesar. You no longer need the ZIP file, so you can execute

rm caesar.zip

and respond with “y” followed by Enter at the prompt to remove the ZIP file you downloaded.

Now type

cd caesar

followed by Enter to move yourself into (i.e., open) that directory. Your prompt should now resemble the below.

caesar/ $

If all was successful, you should execute

ls

and see a file named caesar.c. Executing code caesar.c should open the file where you will type your code for this problem set. If not, retrace your steps and see if you can determine where you went wrong!

Background

Supposedly, Caesar (yes, that Caesar) used to “encrypt” (i.e., conceal in a reversible way) confidential messages by shifting each letter therein by some number of places. For instance, he might write A as B, B as C, C as D, …, and, wrapping around alphabetically, Z as A. And so, to say HELLO to someone, Caesar might write IFMMP instead. Upon receiving such messages from Caesar, recipients would have to “decrypt” them by shifting letters in the opposite direction by the same number of places.

The secrecy of this “cryptosystem” relied on only Caesar and the recipients knowing a secret, the number of places by which Caesar had shifted his letters (e.g., 1). Not particularly secure by modern standards, but, hey, if you’re perhaps the first in the world to do it, pretty secure!

Unencrypted text is generally called plaintext. Encrypted text is generally called ciphertext. And the secret used is called a key.

To be clear, then, here’s how encrypting HELLO with a key of \(1\) yields IFMMP:

plaintext H E L L O
+ key \(1\) \(1\) \(1\) \(1\) \(1\)
= ciphertext I F M M P

More formally, Caesar’s algorithm (i.e., cipher) encrypts messages by “rotating” each letter by \(k\) positions. More formally, if \(p\) is some plaintext (i.e., an unencrypted message), \(p_i\) is the \(i^{th}\) character in \(p\), and \(k\) is a secret key (i.e., a non-negative integer), then each letter, \(c_i\), in the ciphertext, \(c\), is computed as

\[c_i = (p_i + k) \% 26\]

wherein \(\% 26\) here means “remainder when dividing by 26.” This formula perhaps makes the cipher seem more complicated than it is, but it’s really just a concise way of expressing the algorithm precisely. Indeed, for the sake of discussion, think of A (or a) as \(0\), B (or b) as \(1\), …, H (or h) as \(7\), I (or i) as \(8\), …, and Z (or z) as \(25\). Suppose that Caesar just wants to say Hi to someone confidentially using, this time, a key, \(k\), of 3. And so his plaintext, \(p\), is Hi, in which case his plaintext’s first character, \(p_0\), is H (aka 7), and his plaintext’s second character, \(p_1\), is i (aka 8). His ciphertext’s first character, \(c_0\), is thus K, and his ciphertext’s second character, \(c_1\), is thus L. Make sense?

Let’s write a program called caesar that enables you to encrypt messages using Caesar’s cipher. At the time the user executes the program, they should decide, by providing a command-line argument, what the key should be in the secret message they’ll provide at runtime. We shouldn’t necessarily assume that the user’s key is going to be a number; though you may assume that, if it is a number, it will be a positive integer.

Here are a few examples of how the program might work. For example, if the user inputs a key of 1 and a plaintext of HELLO:

$ ./caesar 1
plaintext:  HELLO
ciphertext: IFMMP

Here’s how the program might work if the user provides a key of 13 and a plaintext of hello, world:

$ ./caesar 13
plaintext:  hello, world
ciphertext: uryyb, jbeyq

Notice that neither the comma nor the space were “shifted” by the cipher. Only rotate alphabetical characters!

How about one more? Here’s how the program might work if the user provides a key of 13 again, with a more complex plaintext:

$ ./caesar 13
plaintext:  be sure to drink your Ovaltine
ciphertext: or fher gb qevax lbhe Binygvar
Why?

Notice that the case of the original message has been preserved. Lowercase letters remain lowercase, and uppercase letters remain uppercase.

And what if a user doesn’t cooperate, providing a command-line argument that isn’t a number? The program should remind the user how to use the program:

$ ./caesar HELLO
Usage: ./caesar key

Or really doesn’t cooperate, providing no command-line argument at all? The program should remind the user how to use the program:

$ ./caesar
Usage: ./caesar key

Or really, really doesn’t cooperate, providing more than one command-line argument? The program should remind the user how to use the program:

$ ./caesar 1 2 3
Usage: ./caesar key
Try It

To try out the staff’s implementation of this problem, execute

./caesar key

within this sandbox, substituting a valid integer in place of key.

Specification

Design and implement a program, caesar, that encrypts messages using Caesar’s cipher.

  • Implement your program in a file called caesar.c in a directory called caesar.
  • Your program must accept a single command-line argument, a non-negative integer. Let’s call it \(k\) for the sake of discussion.
  • If your program is executed without any command-line arguments or with more than one command-line argument, your program should print an error message of your choice (with printf) and return from main a value of 1 (which tends to signify an error) immediately.
  • If any of the characters of the command-line argument is not a decimal digit, your program should print the message Usage: ./caesar key and return from main a value of 1.
  • Do not assume that \(k\) will be less than or equal to 26. Your program should work for all non-negative integral values of \(k\) less than \(2^{31} - 26\). In other words, you don’t need to worry if your program eventually breaks if the user chooses a value for \(k\) that’s too big or almost too big to fit in an int. (Recall that an int can overflow.) But, even if \(k\) is greater than \(26\), alphabetical characters in your program’s input should remain alphabetical characters in your program’s output. For instance, if \(k\) is \(27\), A should not become [ even though [ is \(27\) positions away from A in ASCII, per asciichart.com; A should become B, since B is \(27\) positions away from A, provided you wrap around from Z to A.
  • Your program must output plaintext: (with two spaces but without a newline) and then prompt the user for a string of plaintext (using get_string).
  • Your program must output ciphertext: (with one space but without a newline) followed by the plaintext’s corresponding ciphertext, with each alphabetical character in the plaintext “rotated” by k positions; non-alphabetical characters should be outputted unchanged.
  • Your program must preserve case: capitalized letters, though rotated, must remain capitalized letters; lowercase letters, though rotated, must remain lowercase letters.
  • After outputting ciphertext, you should print a newline. Your program should then exit by returning 0 from main.

Advice

How to begin? Let’s approach this problem one step at a time.

Pseudocode

First write, try to write a main function in caesar.c that implements the program using just pseudocode, even if not (yet!) sure how to write it in actual code.

Hint

There’s more than one way to do this, so here’s just one!

int main(void)
{
    // Make sure program was run with just one command-line argument

    // Make sure every character in argv[1] is a digit

    // Convert argv[1] from a `string` to an `int`

    // Prompt user for plaintext

    // For each character in the plaintext:

        // Rotate the character if it's a letter
}

It’s okay to edit your own pseudocode after seeing ours here, but don’t simply copy/paste ours into your own!

Counting Command-Line Arguments

Whatever your pseudocode, let’s first write only the C code that checks whether the program was run with a single command-line argument before adding additional functionality.

Specifically, modify main in caesar.c in such a way that, if the user provides no command-line arguments, or two or more, the function prints "Usage: ./caesar key\n" and then returns 1, effectively exiting the program. If the user provides exactly one command-line argument, the program should print nothing and simply return 0. The program should thus behave per the below.

$ ./caesar
Usage: ./caesar key
$ ./caesar 1 2 3
Usage: ./caesar key
$ ./caesar 1
Hints
  • Recall that you can print with printf.
  • Recall that a function can return a value with return.
  • Recall that argc contains the number of command-line arguments passed to a program, plus the program’s own name.

Checking the Key

Now that your program is (hopefully!) accepting input as prescribed, it’s time for another step.

Add to caesar.c, below main, a function called, e.g., only_digits that takes a string as an argument and returns true if that string contains only digits, 0 through 9, else it returns false. Be sure to add the function’s prototype above main as well.

Hints
  • Odds are you’ll want a prototype like:
    bool only_digits(string s);
    

    And be sure to include cs50.h atop your file, so that the compiler recognizes string (and bool).

  • Recall that a string is just an array of chars.
  • Recall that strlen, declared in string.h, calculates the length of a string.
  • You might find isdigit, declared in ctype.h, to be helpful, per manual.cs50.io. But note that it only checks one char at a time!

Then modify main in such a way that it calls only_digits on argv[1]. If that function returns false, then main should print "Usage: ./caesar key\n" and return 1. Else main should simply return 0. The program should thus behave per the below:

$ ./caesar 42
$ ./caesar banana
Usage: ./caesar key

Using the Key

Now modify main in such a way that it converts argv[1] to an int. You might find atoi, declared in stdlib.h, to be helpful, per manual.cs50.io. And then use get_string to prompt the user for some plaintext with "plaintext: ".

Then, implement a function called, e.g., rotate, that takes a char as input and also an int, and rotates that char by that many positions if it’s a letter (i.e., alphabetical), wrapping around from Z to A (and from z to a) as needed. If the char is not a letter, the function should instead return the same char unchanged.

Hints
  • Odds are you’ll want a prototype like:
    char rotate(char c, int n);
    

    A function call like

    rotate('A', 1)
    

    or even

    rotate('A', 27)
    

    should thus return 'B'. And a function call like

    rotate('!', 13)
    

    should return '!'.

  • Recall that you can explicitly “cast” a char to an int with (char), and an int to a char with (int). Or you can do so implicitly by simply treating one as the other.
  • Odds are you’ll want to subtract the ASCII value of 'A' from any uppercase letters, so as to treat 'A' as 0, 'B' as 1, and so forth, while performing arithmetic. And then add it back when done with the same.
  • Odds are you’ll want to subtract the ASCII value of 'a' from any lowercase letters, so as to treat 'a' as 0, 'b' as 1, and so forth, while performing arithmetic. And then add it back when done with the same.
  • You might find some other functions declared in ctype.h to be helpful, per manual.cs50.io.
  • Odds are you’ll find % helpful when “wrapping around” arithmetically from a value like 25 to 0.

Then modify main in such a way that it prints "ciphertext: " and then iterates over every char in the user’s plaintext, calling rotate on each, and printing the return value thereof.

Hints
  • Recall that printf can print a char using %c.
  • If you’re not seeing any output at all when you call printf, odds are it’s because you’re printing characters outside of the valid ASCII range from 0 to 127. Try printing characters temporarily as numbers (using %i instead of %c) to see what values you’re printing!

Walkthrough

How to Test Your Code

Execute the below to evaluate the correctness of your code using check50. But be sure to compile and test it yourself as well!

check50 cs50/problems/2022/x/caesar

Execute the below to evaluate the style of your code using style50.

style50 caesar.c

How to Submit

In your terminal, execute the below to submit your work.

submit50 cs50/problems/2022/x/caesar